5000 Series: Digital Electronic Access Control Lock
The 5000 series is a battery operated electronic lock, which is easy to
install, programme and operate.
The lock is suitable for domestic and
commercial applications, especially on multi-user doors where
conventional key management control may be a problem.
There are 2
locks in the range but the only difference is the lock bolt, where
there is a choice between an automatically deadlocking deadlatch
(5000/EL) and deadbolt (5100/EL).
There are two levels of access control:
1) By electronic keypad with a range of codes, 1 thru 9
Which provides more than 500,000 possible combinations
2) By touch code key / reader which accepts up to 255 user keys
Programming code changes, either keypad or touch code key, is easily
performed with the use of function buttons.
The lock has a passage function (lock can be opened without code),
which again is easily programmed via the function buttons.
The lock is powered by 4 x AA alkaline batteries, which, with normal
usage should last 12 months.
A low voltage warning system signals low battery power.
In case of complete electronic failure the lock is fitted with a key
override system.Touch code keys are not supplied with the lock but are
available as optional extras.
Keys can be supplied in a range of different holders.
Locks are supplied with a 60mm backset as standard but a 70mm
backset is available to order on the 5000/EL version
|